6 min read OTR Technical Guide

OTR Load, Speed and Cycle Data Log explains the operating evidence, measurements and asset details needed to evaluate this tyre topic consistently across a fleet or worksite.

Keep Every Value in Context

A repeatable assessment of OTR Load, Speed and Cycle Data Log connects physical identification, operating evidence and a dated measurement.

OTR Load, Speed and Cycle Data Log requires load, pressure, speed, distance, time and temperature observations to share the same asset, position and operating period. A value without cold/hot state, device, unit or timestamp cannot be compared reliably.

OTR Load, Speed and Cycle Data Log — Field Data Sheet

Record raw values before calculating averages. Keep the source of target values separate from field readings and note any change in route, payload or ambient conditions.

Reference

Current OEM or tyre technical table used in the evaluation.

Load

Measured or reconciled axle, wheel or cycle load and its source.

Measurement

Pressure or temperature, device, unit, time and state.

Measurement and Comparison

  1. Separate cold readings from post-operation observations.
  2. Compare the series after changes in duty have been marked.
  3. Define the operating cycle and measurement points.

What the Series Shows

A sound OTR Load, Speed and Cycle Data Log record makes missing measurements visible and gives the next site visit a precise collection target.

All technical guides